Introducing Spa Marvel Cleanser – a potent hot tub plumbing cleaner designed to enhance the longevity of your spa equipment. This fast-acting proprietary formula penetrates deep, eliminating biofilm, organic, mineral, and chemical contaminants. In new spas, it removes manufacturing residues like waxes, oils, and resins, preparing your spa for optimal performance.
3-Step Process for using Spa Marvel:
- Use Spa Marvel Cleanser to purge the Spa / Hot Tub.
- Add a single bottle of Spa marvel Water Treatment and Conditioner
- Enjoy your trouble free spa for three months
Why Use Spa Marvel Cleanser:
- Prolongs spa and hot tub equipment life by removing contaminants.
- Cleanses manufacturing residues in new spas for a fresh start.
- Essential before using Spa Marvel Water Treatment & Conditioner to prevent water quality issues.
Instructions:
- Open all jets and water features.
- Remove filters (operating the spa without filters will not harm it).
- Pour 1 bottle of Spa Marvel Cleanser into the water.
- Turn pumps on high for at least 1 hour.
- For spas under 3 months old or with existing Spa Marvel Water Treatment, drain the spa after 1 hour. Otherwise, leave the cleanser for at least another 23 hours on regular filtration cycles.
- It's permissible to leave Spa Marvel Cleanser for more than 23 hours if needed.
- Do not allow bathers to enter the spa with cleanser in the water.
- After the cleaning cycle, drain the spa, rinse it out, and refill following the manufacturer's directions.
- When refilling your hot tub use a Spa Marvel X10 pre filter to capture any unwanted debris before it enters the spa.
- Repeat before every water change for consistent maintenance.
Looking to clean a dirty spa filter? Spa Marvel Filter Cleaner is your go-to solution.
